Fadenbindmaschine, Hersteller: Mehring, Typ: DS-46, Elektronische Programmsteuerung
Transferpresse, Maße: ca. 600 mm x 400 mm, mit digitaler Temperaturanzeige
Klebebinder, inkl. Staubabsaugung, Hersteller: C.P. Bourg, Typ: BB3002
Kreisschere, Hersteller: August Fomm, Maschinennummer: 15615, Einlauf: 700 mm, Anzahl Messer: 8, Getriebemotor: OEG, Typ: MLK 15A/6
Schärfmaschine, Hersteller: Fortuna, Typ: F60, S/N: 38608
Tischpresse, Hersteller: unbekannt, Typ: unbekannt, Pressfläche: ca. 200 mm x 310 mm
Elektrische Schließmaschine, Hersteller: RENZ, Typ: ECL 500
Stanzmaschine, Hersteller: RENZ, Typ: DTP 340 A
Schließmaschine, Hersteller: RENZ, Typ: ECL 360
Anleimmaschine, Hersteller: Jagenberg, Maschinennr.: 12.30124/11, + 12.30376/214
Schneidemaschine, Typ: OCE 913
Schraubenkompressor, Hersteller: Almig, Typ: Combi ED 72, S/N: 11M015125, Betriebsdruck: max. 16 bar, Bh: abgel. 796
Papier-Rütteltisch, Hersteller: Triumpf, Motor: RPM 90-60
Bindemaschine, Megastar Neorel, S/N: 000 3762, Formate bis 14.28 mm - 9/16", inkl. Stanzmodule 3:1 Kalender mit Daumenloch, 4:1 Coilmodul, 2:1 Modul
Blockbinder, Hersteller: Hans-Müller Grapha-Maschinenfabrik, Typ: B1, S/N: 62131, Maße: ca. 1.500 mm x 600 mm x 800 mm
Rückenanreibmaschine, Hersteller: Gantenbein, Typ: Rolong RE, S/N: 1153, Baujahr: 1991
Buchrücken-Rundegerät, Hersteller: Schmedt, Model: PräLomo, Typ: 2500, Baujahr: 2009
Eckrunder, Hersteller: Warrior, Typ: 21144, Radius, 6 mm
Rollenlaminator, Hersteller: Royal Sovereign, Typ: RSL-2701
Heissprägepresse, Hersteller: unbekannt, Typ: unbekannt, Heizelement + Thermostat, Prägewerkzeug: max. 200 mm x 150 mm
Hochleistungs-Stanzmaschine, Hersteller: Fellowes, Typ: Lamirel-Megastar, Formate: bis 420 mm, 16 1/2", S/N: 000096
Klebebinder, Hersteller: Wohlenberg, Typ: Quickbinder, S/N: 258, Baujahr: 2012, Zubehör, Pur-Rückenleimwerk, Hotmelt-Seitenleimwerk, ein Satz Rillwerkzeuge, DSL Modem, mechanische Leistung: 500 - 2000...
Buchdecken-Rückenrundemaschine, Hersteller: Schmedt, Typ: PräRund, Arbeitsbreite: bis 450 mm
Rillmaschine, Hersteller: CMC, Typ: Ariemat Arm 75, Maschinennummer: 65.360.01.15, Volt: 400, Hz: 50, max. Stück/min. 30, max. g/m2 Dicke/min. 300, max. mm Dicke/min. 4.0, Leistung: 2,65 Kw, Gewicht: ...
Partie Europaletten, bestehend aus ca. 26 Stück
Partie antike Buchbindemaschinen, Holzausführung, ca. 5 Stück
Elektrische Spiralisiermaschine, Hersteller: RENZ, Typ: CBS 360
Passepartout-Schneidesystem, Hersteller: Wizard, Typ: 9000, Switch Blade, Schnittgeschwindigkeit: bis zu 50,8 cm / Sekunde, Steuerbox: ECU 9000, 22" TFT Monitor
2-Spindel Bohrmaschine, Hersteller: Ernst Nagel, Typ: Citoborma 280, Maße: ca. 1.700 mm x 800 mm x 850 mm
Falzeinbrennmaschine, Hersteller: Gantenbein, Typ: Rolong RAEL, S/N: 0668, Baujahr: 1967
Buchpresse, Hersteller: REH, Typ: unbekannt
Kanteneinschlagmaschine, Hersteller: Schmedt, Typ: PräKant, S/N: 1074, Baujahr: 2011, für Buchdecken und Poster im Format 150 mm x 150 mm - 600 mm x 600 mm
Kaltlaminator, Hersteller: Neschen, Typ: K600, S/N: 5100041
Hochleistungsschnellschneider, Hersteller: Wohlenberg, Typ: WB 76, Maschinennummer: 76469, Baujahr: 2013, Betriebsspannung: 400V, 50 Hz, Nennstrom 7,6A, CIP Datenmodul, Bh: abgel. 16.185
Eckrunder, Hersteller: Warrior, Typ: 21144, Radius, 6 mm
Platten- und Papierschneidegerät, Hersteller: Bacher, Typ: 1620, S/N: 1411, Baujahr: 1983
Farbprüfleuchte, Hersteller: JUST Normlicht, Bh: abgel. 44545, Maße: ca. 1.000 mm x 500 mm
Klebebindemaschine, Hersteller: Gantenbein, Typ: Bufalo BAFC 33, S/N: 0553, Baujahr: 1966
Nietmaschine, Hersteller: S.P.S Gambolo, Typ: 75-11, S/N: 560353, Baujahr: 1982
Buchrückenbeleimmaschine, Hersteller: Hunkeler, Typ: BRLT 100, S/N: 50375-1
Druckercontroller, Hersteller: EFI Fiery, vermutlich defekt
Manuelle Bindemaschine, Hersteller: RENZ, Typ: Private Bind
Elektrische Bindemaschine, Hersteller: Gestetner, Typ: VeloBind 570P + Velobind 50 AP, S/N: GC11597
Elektrische Bindemaschine, Hersteller: GBC, Typ: SureBind System 3 Pro
Elektrische Bindemaschine, Hersteller: Akiles, Typ: Finish-@Coil-M
Bindemaschine, Hersteller: Fellowes, Typ: PC 2300
Zusammentragmaschine, Hersteller: Uchida, Typ: UC 1000
Bindemaschine, Hersteller: RENZ, Typ: CLE 68, S/N: 1304, Baujahr: 1983, Spannung: 380V
Ultra automatische Stanze, Hersteller: GBC, Typ: AP-2, S/N: 7137A0200, Baujahr: 2001, inkl. 5 Stanzmodule, 2:1, 3:1, 4:1, 4er Lochung, 2er Lochung
Kanteneinschlag- und Anreibe-Maschine, Hersteller: Schmedt, Typ: PräKant HHS, S/N: 31, Baujahr: 1969
Klebebindegerät, Hersteller: Schmedt, Typ: PräColl HHS 11 RR, S/N: 418, Baujahr: 1993
Fächerklebebinder, Hersteller: unbekannt, Technische Daten: unbekannt, Getriebemotor: Eberhard Bauer, Typ: ED 44
Eckenstanzmaschine, Hersteller: Jagenberg, Typ: unbekannt, mit Fussbedienung
Rückenanreibmaschine, Hersteller: Gantenbein, Typ: Rolong RA, S/N: 0495, Baujahr 1964
Klebebinder, Hersteller: Gantenbein, Typ: Bufalo BAFC 33, S/N: 0692, Baujahr: 1970
4-Kopf Papierbohrmaschine, Hersteller: Josef Foellmer, Typ: Iram 16, S/N: 2523, Baujahr: 1992, Maße: Tisch 600 mm x 500 mm
Staubabsauganlage, Hersteller: unbekannt, Typ: unbekannt, Technische Daten: unbekannt
Druck- und Vakuumkompressor, Hersteller: Gebr. Becker Maschinenfabrik, Typ: unbekannt, Technische Daten: unbekannt
Buchdeckenfertigungsmaschine, Hersteller: CMC, Model: Q Cover Four, Typ: 46 x 100, S/N: 95.067.01.15, Baujahr: 2015, min. Format: 150 mm x 150 mm, max. Format-Einschlag: 480 mm x 780 mm, Leistung: 4.0...
Deckenmachgerät, Hersteller: Schmedt, Typ: PräDeck HHS 13, S/N: 247, Baujahr: 1986
Pappenfräsmaschine inkl. Staubabsaugung, Hersteller: CMC, Model: Castor, Typ: CAS 110S, S/N: 83.059.01.15, Baujahr: 2015, min. Format: 180 mm x 180 mm, max. Format: 1.100 mm x 800 mm, Dicke: 1,5 mm - ...
Halbautomatisches Bogen-Laminiersystem, Hersteller: GMP, Typ: Protopic II-540, S/N: XK54S30043, max. Laminierbreite: 540 mm
Zusammentragmaschine, Hersteller: Theisen & Bonitz, Typ: TB Sprint 310 VP, Maschinennummer: 1530, Baujahr: 1994 +
Heft-Falz-Schneideautomat, Hersteller: Theisen & Bonitz, Typ: TB Sprint 303, Maschine...
Buchpresse, Hersteller: Polygraph Rodas, Typ: SP, Baujahr: 1954
Buchpresse, Hersteller: Polygraph Rodas, Typ: SP, Baujahr: 1955
Registerstanze, Hersteller: Nagel, Typ: VS 66, Progr.-Nr.: 16018259, Schnitt: 23,8 x 0,71
Schwenktisch-Rüttler, Hersteller: C.P. Bourg
Papier-Schneidemaschine, Hersteller: Polar, Typ: 76 EM, Maschinennummer: 536.1165, Baujahr: 1983, Schnittbreite: ca. 760 mm, Maße: ca. 1.800 mm x 1.400 mm x 1.500 mm, inkl. 2 Stück Hagedorn Messer
Zusammentragmaschine, Hersteller: C.P. Bourg, Typ: Modulen Collator, Doppel-Fehl- und Staukontrolle, Saugkalibrierung, elektronische Steuerung für die Programmierung, Baujahr: unbekannt, Maschiennumme...
Perforier- und Nutmaschine, Hersteller: E.Bickel Heilbronn, Typ: unbekannt, Bedienung über Fußpedal, Getriebemotor: AEG, Typ: NK 431-6, 220/380V, inkl. Nutkamm für schmale und breite Rillen
Schrumpfverpackungssystem, Hersteller: Hugo Beck, Typ: WS21-500, mit Schrumpftunnel, Typ: SL22-613, Maschinennummer WS21: 4727, Maschinennummer SL22: 5028, Baujahr: unbekannt
We are happy to help you:
Monday till Friday
08:00 - 17:00
Phone: +49 (0) 40 554 931 400
Email: info@greenfield-auctions.com
Register
Thank you for your subscription.
An error has occured during the subscription. Please try again later.
Within the framework of a machinery auction from Greenfield Auctions, you can sell machinery and stock quickly and successfully. As the machinery auctions are conducted exclusively online, the sale of machinery is particularly quick. In a machine auction, the items are auctioned off against the highest bid. Before bidding, the buyers have the opportunity to inspect the machines and get an idea of their condition.
Greenfield Auctions also produces an online catalogue with all the items in the auction, in which you can read the most important information about the machines.
At a machinery auction you will find the most diverse products. In our experience, auctions specialising in certain areas are particularly popular. Whether woodworking machines or metalworking machines, the selection is large, so that especially industrial auctions are carried out by our auction house Greenfield Auctions. As a rule, it is mainly machines for the manufacturing industry in all sectors that are offered.
Since it is not uncommon for companies to completely close down their operations, the offer often goes beyond the actual machinery. By means of our appraisals, the value of the machinery on offer can be estimated before a machinery auction. So if you want to participate in an online machinery auction, we strongly advise you to look at the information provided and assess the state of preservation.
The great advantage of an Greenfield Auctions machine auction is above all the much more favourable prices and the fast availability of the machines. Especially the fast availability is extremely important for most companies. But online auctions offer even more advantages.
After all, the machines can be marketed within a very short time due to their worldwide reach. Moreover, compared to other sales channels, considerably more potential buyers are reached, because international buyer circles are also addressed in our online auctions. Since the auction platform is accessible to everyone, large and small companies have the same chances at a machinery auction.
At a machinery auction, the price of the machinery is determined by an industrial valuer. This price is the minimum price. The bids of the other bidders become visible in the course of the auction. During the auction, various bids are submitted, whereby the higher bid replaces the lower bid. The machine auction ends when no further bids are made for 120 seconds after the highest bid. The highest bidder is awarded the contract and the machine auction is over. If you have won the auction without reservation, you bear the rights and obligations relating to the machine.
To ensure that you are not negatively surprised at a machine auction, there are a few things to consider when participating in an auction. The most important thing at a machinery auction is that you inform yourself in advance about the machines on offer. Whether on-site inspection or picture and video material, how you inspect the offered objects is up to you. Further information on the individual machines can also be found out by tracing the serial number or model number, if these are available.
The reason for participating in an Greenfield Auctions machine auction is above all the hope of getting a low price. But to ensure that the supposed bargain remains one, you should find out in advance about the additional costs for the buyer. Expenses such as fees for the auctioneer, taxes or dismantling and transport costs should be clear beforehand. Let us evaluate your machinery to achieve the best possible results at a machinery auction.
For more information, feel free to visit our FAQs.